检测认证人脉交流通讯录
J115型纺织机械计数器(J115-001 Textile Mechanical Counter)
- 用 途：
- 主要应用于实行多班制的纺织行业的织布机、织带机等机器上
- 工作原理及简介： J115型纺织机械计数器是用四组计数轮的数码显示，用一个分班调位旋钮控制。当分班调位旋钮显示“A”的时候，则输入轴转动，A组计数轮计数。如果将调位旋钮分别调到B、C、D，则与调位旋钮指示相同的那一组计数轮显示输入轴的转数。（该计数器只能进行累加计数，不设复零机构，可以用来统计记录一台机器上不同班次的产量）。
主要应用于实行多班制的纺织行业的织布机、织带机等机器上。
产品系列及相关技术参数： 型号 J115-001
显示数字规格 高×宽 6.5 mm×3.8 mm
工作温度 -10℃～+50℃
最大积算容量 99999.9
输入轴转数/数码显示 12.5：1
额定转速 ≤1200r/min
转矩 ≤1.5 N·cm
班次 4
可根据客户需要设计制作
Introduction: With the rotation of the input axis, the counter drives the internal worm, worm gear and gear mechanism to display the rotation rounds on the 4 groups of decimal counting wheels, which are controlled by a division adjusting knob. When the division adjusting knob indicates “A”, the input axis rotates, and the group A counting wheels count. If the adjusting knob is adjusted to B, C and D respectively, the counting wheel group to which the adjusting knob points will display the rotation rounds of the input axis.
This counter can only be used to carry out accumulative adding, it has no reset mechanism. it can be used to record the output of different shifts on the same machine, and mainly applied in the looms and tape weaving machines with multi-suifts, in textile industry.
Technical Parameters: Display digit size H*W mm 6.5*3.8
Max. capacity accumulative counting 99999.9
Transmission ratio rotation times of input axis/digit display=12.5/1
Torque 1.5Ncm
Rate rotation speed 1200r/min
Shift 4
Weight 1200g
