检测认证人脉交流通讯录
- C-1027插头引线弯折试验机
PLUG BENDING TESTER
UL817、CSA22.2、IEC884-1、CCC、GB2099.1、VDE、SAA、JIS
本机专门测试 AC / DC 插头引出线及电线之耐折强度。试是将试样固定在夹具上加一定荷重及弯曲一定次数后检视其断线率。
This tester is specialized in testing the flexing endurance between power cord and blades，and is capable of testing the flexibility resistance of the cord itself。Samples are to be secured in the jaws of the flexing apparatus，and cord is to hang vertically with the weight tied on the lower end of it。The rotating jaws are to be adjusted to rotate to the angle of 90 degree to each side of the centered position。After a certain cycles is reached or until specimen is broken，detect the breakage ratio or calcuate the total cycles。This machine is able to auto-count and auto-stop during specimen broken
试料数量 Specimen Volume 1 组（或 6 组）
摆动角度 Flexing angles 左右各 180º（或任意角度）连续设定，两方向可以不对
称，数字键盘设定数值，精度：0.1 度
摆动速度 Flexing speed 10 ~ 60c.p.m 可调节，数字键盘设定
自动计数器 Auto - counter 1~999999次，可预置
荷重 Load 50g、100g、200g、300g、500g 各 1 个
控制系统 Control 伺服系统
负载电压 Load Voltage 0 ~ 280V 连续可调
负载电流 Load Current 0 ~ 30A 连续可调
其它功能 Other function 所有数据为 16 x 2 LCD（带背光源）数字显示，具有断线
停机，数据保持功能及密码功能，防止随意调节。
电源 Power AC220V / 50Hz
