检测认证人脉交流通讯录
华乐士机床油泵浸水式水泵TPAK8-25，TPAk4-25
- 华乐士机床油泵浸水式水泵TPAK8-25，TPAk4-25
Model: TPAK Series
Coolant Pumps
Domestic Commercial Industry
*
* Note:
50Hz 60Hz 50/60Hz
*
* Note:
See Details ...
Perfomance Curves:
Application:
The TPAK Series coolant pump is design for the circulation and spraying of cooling lubricants, especially for machine tools.
This series may use on all machine tools performing Turning, Milling, Drilling, Cutting, Slitting, Grinding etc. operation.
It is suitable to carry liquids such as water, coolant, light oil and other clean, non aggressive matters.
Pump Construction:
The pump is one-chamber vertical centrifugal pump, co-axial pump/motor design, impellers mounted on extended motor shaft.
Motor:
Nominal speed : 2900 / 3500 rpm
Frequency range : 50 / 60 Hz
Standard voltages : Single-phase ( TPAK 1 )
50Hz: 100-132V / 200-255V
60Hz: 100-132V / 200-255V
Three phases ( TPAK 1 ~ TPAK 8 )
50Hz: 200-255V / 380-440V
60Hz: 200-255V / 380-480V
Enclosure class : IP54
Insulation class : F.
Operation Conditions :
Max. flow : 230 L/min
Max. head : 17m
Max. ambient temperature : +40°C
Max. liquid temperature range : +90°C
Max. operating pressure : 10 kg/cm²
TPAK SERIES
Model PH
(Ø)
Cycle
(Hz)
Input
Power
(W) Volts
(V) Full load
current
(A)
TPAK 1 1 50 110 100-132 / 200-255 0.9-1.2 / 0.45-0.6
60 110 100-132 / 200-255 0.9 / 0.45
3 50 120 200-255 / 380-440 0.40-0.56 / 0.27-0.32
60 120 200-255 / 380-480 0.5 / 0.3
TPAK 2 3 50 270 200-255 / 380-440 1.0-1.3 / 0.6-0.8
60 350 200-255 / 380-480 1.2 / 0.7
TPAK 4 3 50 440 200-255 / 380-440 1.5-1.9 / 0.9-1.2
60 620 200-255 / 380-480 2.0 / 1.1
TPAK 8 3 50 930 200-255 / 380-440 3.1-4.4 / 1.9-2.6
60 1320 200-255 / 380-480 4.0 / 2.4
